Revestimento Exterior Pinheiro Siberiano República Checa À Venda

  • Oferta
    18205505
  • Data
    2019-06-24
  • Valid until:
    Permanente

Produtos

Tipo Revestimento Exterior
Material principal Madeira sólida
Tipo de madeira maciça Madeira Macia Européia
Espécies Pinheiro Siberiano
Origem das espécies Finlândia

Especificações

Volume 1 - 100 m3 por mês
Espessura 19-40 mm
Largura 90-145 mm
comprimento 2000-6000 mm
Qualidade A{B or C Grade
Arquivos
  • Arquivo de especificação1
  • Descrição Thermo wood is dimesionally stable, resilient and entirely ecological with higher resistance against biological pests, our facade profiles are made from pine harvested in Finland.
    Processing: Thermo wood supplied by us is made using a WTT method during which the wood is treated at 180°C.
    • No chemicals are used during the thermal treatment. Only a little bit of water is needed to start the process. The rest takes place thanks to a gradual increase of temperature inside of a pressurised chamber (7–9 bars). Gradual heating of the wood releases moisture and creates an environment full of steam that ensures even colouring and treatment of the wood. Thanks to this process the wood is environment friendly and doesn’t endanger surrounding fauna. • Before the actual thermal treatment, the wood is pre–dried to 12–14% of moisture content. An important part of the WTT process is that the wood is never dried out completely. On the contrary, the remaining moisture content stays at 6–8%. This is the final humidity for thermo– wood. • Modern technology controls the entire manufacturing process and thereby guaranteeing a uniform treatment of the wood. Thanks to this treatment the pine changes its original naturally light yellow tone to a light dark colouring. • The wood obtains significantly improved dimensional stability and thereby reducing the woods vulnerability to deformation respectively swelling and shrinking of the wood. Dimensional changes are reduced by up to 60%.
    • The wood shows increased resistance to rot and mould and also improved insulation properties.
    Coat and colour If you opt for treating your thermo–wood decking with a coat to prevent it from naturally turning grey (occurs approx. 1 year after installation) we recommend to use OSMO Decking oil n. 010 Thermo–wood oil. OSMO Decking oil is a coat based on natural plant oils and waxes and thanks to these materials is this coat not harmful to health in any way. The pigment contained in this coat doesn‘t cause any significant change in the natural tone of the thermo–pine, on the contrary the tone gets even more enhanced and furthermore the wood is protected from the UV rays that are the main cause of the wood turning grey. Do not however put the coat on any sooner than 3 months after installation. During these 3 months the wood will naturally loose some of the substances within and it will finish stabilizing after the thermal treatment.
    Wood density Approx. 510 – 550 kg/m3.
    We supply facade profiles from Thermo pine according to ČSN EN 14519.

    Preços e Condições

    Preço Sob demanda EUR por m3
    Incoterm FCA - Franco transportador País República Checa Região Prague
    Prazo de entrega Em estoque
    Vende para: Mundial

    Vendedor

    Confirmo que li e compreendi a Declaração de Privacidade da Fordaq

    Ao efetuar o registro, você concorda com as nossas Condições Gerais